VehicleType Class

Initializes a new instance of the VehicleType class

The user data of the component.

Gets the base type of the object.

The type of chassis.

Whether the object supports cloning.

Gets the collection of the child components.

Whether the object is created using a base type.

Whether to show the object in the editor.

Whether the object is disposed.

Gets or sets the configuration data of the object's settings in the editor.

Whether the object is read only in the editor.

Whether the object is read-only in the editor with respect to parent objects.

Whether the component is enabled. Any functionality of component is not works when it disabled.

Determines whether the object is attached to a hierarchy of the components and enabled. The object will be enabled only when all parents are enabled, and the property Enabled is enabled.

Determines when the object is attached to a hierarchy of the components, is enabled and the object if not part of a resource (it is usual object instance). The object will be enabled only when all parents are enabled, and the property Enabled is enabled.

Angular damping factor of the wheel: dw/dt = -c * w.

Stiffness (spring constant in N/m) of front wheel anti rollbar. Can be 0 to disable the anti-rollbar.

The diameter of a front wheel.

How much of the engines torque is applied to this differential (0 = none, 1 = full).

Defines how the engine torque is split across the left and right wheel (0 = left, 0.5 = center, 1 = right).

Ratio max / min wheel speed. When this ratio is exceeded, all torque gets distributed to the slowest moving wheel. This allows implementing a limited slip differential. Set to FLT_MAX (3.402823466e+38F) for an open differential. Value should be > 1.

Ratio between rotation speed of gear box and wheels.

Friction in sideway direction of tire as a function of the slip angle (degrees): angle between relative contact velocity and vehicle direction.

Friction in forward direction of tire as a function of the slip ratio (fraction): (omega_wheel * r_wheel - v_longitudinal) / |v_longitudinal|.

The mass of a front wheel.

How much torque (Nm) the brakes can apply to front wheel.

How much torque (Nm) the hand brake can apply to front wheel.

The maximal steering angle of front wheels.

The mesh of a front wheel.

The position offset for front wheels.

The width of a front wheel.

Gets the object hierarchy control controller.

Defines the maximum pitch/roll angle, can be used to avoid the car from getting upside down. The vehicle up direction will stay within a cone centered around the up axis with half top angle MaxPitchRollAngle, set to 180 to turn off.

Max angle that is considered for colliding wheels. This is to avoid colliding with vertical walls.

The main mesh of the vehicle.

The name of the component.

Whether to work in network server mode. It is false until the scene is not loaded.

Whether to enable synchronization of the component between server and clients.

Gets the parent object.

Gets the parent root object.

Angular damping factor of the wheel: dw/dt = -c * w.

Stiffness (spring constant in N/m) of rear wheel anti rollbar. Can be 0 to disable the anti-rollbar.

The diameter of a rear wheel.

How much of the engines torque is applied to this differential (0 = none, 1 = full).

Defines how the engine torque is split across the left and right wheel (0 = left, 0.5 = center, 1 = right).

Ratio max / min wheel speed. When this ratio is exceeded, all torque gets distributed to the slowest moving wheel. This allows implementing a limited slip differential. Set to FLT_MAX (3.402823466e+38F) for an open differential. Value should be > 1.

Ratio between rotation speed of gear box and wheels.

Friction in sideway direction of tire as a function of the slip angle (degrees): angle between relative contact velocity and vehicle direction.

Friction in forward direction of tire as a function of the slip ratio (fraction): (omega_wheel * r_wheel - v_longitudinal) / |v_longitudinal|.

The mass of a rear wheel.

How much torque (Nm) the brakes can apply to rear wheel.

How much torque (Nm) the hand brake can apply to rear wheel.

The maximal steering angle of rear wheels.

The mesh of a rear wheel.

The position offset for rear wheels.

The width of a rear wheel.

Whether the object is placed in the detach queue from the parent.

Whether the object supports saving to a file.

The displaying mode of an on-screen label of the component in the scene editor.

How to switch gears.

How long it takes to release the clutch (go to full friction), only used in auto mode.

Strength of the clutch when fully engaged. Total torque a clutch applies is Torque = ClutchStrength * (Velocity Engine - Avg Velocity Wheels) (units: k m^2 s^-1).

Ratio in rotation rate between engine and gear box, first element is 1st gear, 2nd element 2nd gear etc.

Ratio in rotation rate between engine and gear box when driving in reverse.

If RPM of engine is smaller then this we will shift a gear down, only used in auto mode.

If RPM of engine is bigger then this we will shift a gear up, only used in auto mode.

How long to wait after releasing the clutch before another switch is attempted (s), only used in auto mode.

How long it takes to switch gears (s), only used in auto mode.

Object settings when used as a type.

Adds a component as a child.

Creates a copy of the object.

Creates a child component.

Creates a child component.

Creates a child component.

Detaches the object from the hierarchy and deletes the object data.

Determines whether the specified object is equal to the current object.

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

Finds the parent of the specified type.

Finds the parent of the specified type.

Finds the parent of the specified type.

Finds the parent or self of the specified type.

Finds the parent or self of the specified type.

Finds the parent or self of the specified type.

Gets all parents of the component.

Finds a child component by name.

Finds a child component of the specified type.

Finds a child component of the specified type.

Finds a child component of the specified type.

Finds a child component by name and number in the case when there are several components with the specified name.

Finds a child component by path.

Finds child components.

Finds child components.

Finds child components of the specified type.

Finds child components of the specified type.

Finds child components of the specified type.

Serves as the default hash function.

Returns the path to the object from the parent.

Returns the object's access path from the root object.

Returns a type when the object is used as a type.

Gets the Type of the current instance.

Checks if a method is running over time. You can start executing such methods using MethodInvoke(String, Object, Double, Double) method.

Creates a shallow copy of the current Object.

Returns the object metadata member by name.

Returns the object metadata members.

Calls a method by name.

Cancels the execution of selected method that run over time. You can start executing such methods using MethodInvoke(String, Object, Double, Double) method.

Cancels the execution of all methods that run over time. You can start executing such methods using MethodInvoke(String, Object, Double, Double) method.

Called during object creation in the editor. Designed to configure the initial state.

Called when a component is added to the parent.

Called when the object is cloned.

Called when a child component is added.

Called when a child component is removed.

Called when the object is detached from a hierarchy of the components or is disabled. See also EnabledInHierarchy property.

Called when the object is detached from a hierarchy of the components or is disabled. The method is called only in simulation application. See also EnabledInHierarchy property.

Called when the object is disposed.

Called when the object is attached to a hierarchy of the components and is enabled. See also EnabledInHierarchy property.

Called when value of Enabled property is changed.

Called when the object is attached to a hierarchy of the components and is enabled. The method is called only in simulation application. See also EnabledInHierarchy property.

Called during object loading.

Called when the object metadata member is received by name.

Called upon receipt of the object's metadata members.

Called when preloading the resources used by the object.

Called when a component is removed from the parent.

Called during object saving.

Called during the simulation step.

Called during the simulation step.

Called during the update process of all objects.

Preload resources used by the object.

Gets the value of a property by name.

Sets the value of a property by name.

Removes all child components.

Removes a child component.

Detaches the object from its parent.

Returns the name and type of the object as a string.

Checks whether the object provided as a type is public.

Checks whether the member is set up as public.

Occurs when a component is added to the parent.

Occurs when the Chassis property value changes.

Occurs when object is cloned.

Occurs after changing value of CloneSupport property.

Occurs when a child component is added.

Occurs when a child component is removed.

Occurs when the set of children is changed.

Occurs when the object is disabled from a hierarchy of the components or is disabled. See also EnabledInHierarchy property.

Occurs when the object is detached from a hierarchy of the components or is disabled. The method is called only in simulation application. See also EnabledInHierarchy property.

Occurs when value of DisplayInEditor property is changed.

Occurs when the object is disposed.

Occurs when the Enabled property value changes.

Occurs when the object is attached to a hierarchy of the components and is enabled. See also EnabledInHierarchy property.

Occurs when the EnabledInHierarchy property value changes.

Occurs when the object is attached to a hierarchy of the components and is enabled. The method is called only in simulation application. See also EnabledInHierarchy property.

Occurs when the EngineMaxRPM property value changes.

Occurs when the EngineMaxTorque property value changes.

Occurs when the EngineMinRPM property value changes.

Occurs when the FrontWheelAngularDamping property value changes.

Occurs when the FrontWheelAntiRollBarStiffness property value changes.

Occurs when the FrontWheelDiameter property value changes.

Occurs when the FrontWheelDifferentialEngineTorqueRatio property value changes.

Occurs when the FrontWheelDifferentialLeftRightSplit property value changes.

Occurs when the FrontWheelDifferentialLimitedSlipRatio property value changes.

Occurs when the FrontWheelDifferentialRatio property value changes.

Occurs when the FrontWheelDrive property value changes.

Occurs when the FrontWheelMass property value changes.

Occurs when the FrontWheelMaxBrakeTorque property value changes.

Occurs when the FrontWheelMaxHandBrakeTorque property value changes.

Occurs when the FrontWheelMaxSteeringAngle property value changes.

Occurs when the FrontWheelMesh property value changes.

Occurs when the FrontWheelPosition property value changes.

Occurs when the FrontWheelSteeringTime property value changes.

Occurs when the FrontWheelSuspensionDamping property value changes.

Occurs when the FrontWheelSuspensionFrequency property value changes.

Occurs when the FrontWheelSuspensionMaxLength property value changes.

Occurs when the FrontWheelSuspensionMinLength property value changes.

Occurs when the FrontWheelSuspensionPreloadLength property value changes.

Occurs when the FrontWheelWidth property value changes.

Occurs when the GearDownSound property value changes.

Occurs when the GearSoundsChanged property value changes.

Occurs when the GearUpSound property value changes.

Occurs during object loading.

Occurs when the MaxPitchRollAngle property value changes.

Occurs when the MaxSlopeAngle property value changes.

Occurs when the Mesh property value changes.

Occurs when the object metadata member is received by name.

Occurs upon receipt of the object's metadata members.

Occurs when filtering receive members of the object metadata.

Occurs when the MotorOffSound property value changes.

Occurs when the MotorOnSound property value changes.

Occurs when component name is changed.

Occurs when the NetworkMode property value changes.

Occurs when preloading the resources used by the object.

Occurs when the RearWheelAngularDamping property value changes.

Occurs when the RearWheelAntiRollBarStiffness property value changes.

Occurs when the RearWheelDiameter property value changes.

Occurs when the RearWheelDifferentialEngineTorqueRatio property value changes.

Occurs when the RearWheelDifferentialLeftRightSplit property value changes.

Occurs when the RearWheelDifferentialLimitedSlipRatio property value changes.

Occurs when the RearWheelDifferentialRatio property value changes.

Occurs when the RearWheelDrive property value changes.

Occurs when the RearWheelMass property value changes.

Occurs when the RearWheelMaxBrakeTorque property value changes.

Occurs when the RearWheelMaxHandBrakeTorque property value changes.

Occurs when the RearWheelMaxSteeringAngle property value changes.

Occurs when the RearWheelMesh property value changes.

Occurs when the RearWheelPosition property value changes.

Occurs when the RearWheelSuspensionDamping property value changes.

Occurs when the RearWheelSuspensionFrequency property value changes.

Occurs when the RearWheelSuspensionMaxLength property value changes.

Occurs when the RearWheelSuspensionMinLength property value changes.

Occurs when the RearWheelSuspensionPreloadLength property value changes.

Occurs when the RearWheelWidth property value changes.

Occurs when a component is removed from the parent.

Occurs during object saving.

Occurs after changing value of SaveSupport property.

Occurs when the ScreenLabel property value changes.

Occurs during the simulation step.

Occurs during the simulation step.

Occurs when the TransmissionAuto property value changes.

Occurs when the TransmissionClutchReleaseTime property value changes.

Occurs when the TransmissionClutchStrength property value changes.

Occurs when the [!:SpecialEffects] property value changes.

Occurs when the [!:SpecialEffects] property value changes.

Occurs when the TransmissionShiftDownRPM property value changes.

Occurs when the TransmissionShiftUpRPM property value changes.

Occurs when the TransmissionSwitchLatency property value changes.

Occurs when the TransmissionSwitchTime property value changes.

Occurs when the TurretTurnSound property value changes.

Occurs during the update process of all objects.

Calls the object method by name.

Gets the value of the object property by name.

Gets the value of the object property by name.

Sets the value of the object property by name.